BUTTERFLY VALVE, CENTRIC SEMI LUG, PN10/16
Fixed NBR liner, stainless steel disc
Contact
Enquiries (Office)
AVK Singapore Pte. Limited, 40 Gambas Crescent Nordcom 2 757018 Singapore Singapore
Centric butterfly valve with fixed liner - semi lug - stainless steel disc for fire protection application
AVK centric butterfly valves with fixed liner feature an outstanding seating concept. The rubber is injection moulded directly on the valve body forming a permanent bond. Consequently, there is no risk of deformation or dislocation of the liner making the valves suitable under vacuum conditions. The combination of the profiled disc edge and the excellent AVK rubber quality ensures maximum durability of the liner.
| Variant 75/31-023 | |
|---|---|
| Connection: | Flanged |
| Material: | Ductile iron |
| PN: | PN10/16 |
Features
- Bonded vulcanized liner of NBR with an excellent compression set and thus ability to regain its original shape.
- Streamlined disc with minimum flow resistance.
- Profiled disc edge requires minimal deformation of the liner to achieve tight sealing, and results in less wear of the liner.
- Shaft and disc of stainless steel AISI 431.
- Shaft bearings of PTFE coated steel.
- Top shaft sealing consisting of a bronze bushing with two EPDM O-rings.
- Bottom shaft sealing consisting of a plug of galvanized steel with a copper sealing ring.
- Low torques as a result of the profiled disc edge and fixed liner design.
- Ductile iron body with PUR coating red RAL 3000.
Downloads
Datasheet
Tender Text
Certificate(s)
Outline drawings
Components
| 1. | Shaft | Stainless steel AISI 431 |
| 2. | Bushing | Bronze |
| 3. | O-ring | NBR rubber |
| 4. | Body | Ductile iron GJS-400-15 |
| 5. | Bearing | Steel, PTFE coated |
| 6. | Conical pin | Stainless steel AISI 431 |
| 7. | Disc | Stainless steel AISI 431 |
| 8. | Shaft | Stainless steel AISI 431 |
| 9. | Liner | NBR rubber |
| 10. | Bearing | Steel, PTFE coated |
| 11. | Seal ring | Copper |
| 12. | Plug | Steel, galvanized |
Test/Approvals
- Approved according to FM
Standards
- Face-to-face dimension according to EN 558, basic series 20
- End connection to EN1092, PN10/16
